Neutrik NBNB75ILP9 Panel-Mount Receptacles Crimp Isolated Suits Belden 1505A Draka 0.8/3.7

NBNB75ILP9

BNC cable jack for panel mount, isolated
Neutrik’s BNC cable jacks for panel mount offer a true 75 Ω design for serial and digital (HD) signals. The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use.

Suitable cables: Belden 1505A, Belden 8241F, Canare L4CFB, CommScope 5565, Draka 0.8/3.7 AF, Draka 755-801 (803, 804), Gepco VPM2000, Suhner S04263, Sommer 600-0451
Crimp size:

Pin: 1.6 mm (square)
Shield: 6.47 mm (hex)

Features & Benefits

Gold plated center contact
True 75 Ω design meets the stringent HD requirements
Isolated panel mount (solves potential grounding problems and prevents common-mode influence with other connections conducted over the same panel ground potential)

Specifications

Connection Type BNC 75 Ω

Gender female

Electrical

Contact resistance ≤ 3 mΩ (inner)

Contact resistance ≤ 2 mΩ (outer)

Dielectric strength 1,5 kVdc

Impedance 75 Ω

Insulation resistance > 5 GΩ

Rated voltage <50 V

VSWR

≤1.050/>32 dB up to 1 GHz
≤1.065/>30 dB up to 2 GHz
≤1.100/>26 dB up to 3 Ghz

Mechanical

Cable O.D. 4 – 7.7 mm

Cable retention > 30 N (Center)

Crimp size 6,47 Hex crimp (shield) acc. IEC 60803 (die designation E)

Crimp size (pin) 1,6 Square crimp (pin) acc. IEC 60803 (die designation 2)

Insertion force < 25 N

Lifetime > 1000 mating cycles

Locking device Bayonett

Mounting direction Rear mounting

Chassis shape 12.7 mm

Cable anchoring Jacket crimping

Material

Contacts Brass (CuZn35Pb2), 0.2 µm AuCo (Center contact)

Insert PTFE

Shell Brass (CuZn39Pb3)

Shell plating Optalloy®

Environmental

Temperature range -30 °C to +85 °C

Contact crimpability

Complies with IEC 60803 and IEC 60352-2