Neutrik NBNC75BDD6X Reartwist UHD BNC Pin 1.07mm Shield 4.53mm Suits Belden 1855A

rearTWIST UHD BNC cable connector pin 1.07mm shield 4.53mm

NBNC75BDD6X

The rearTWIST UHD BNC connectors are specifically designed for high resolution video signal transmissions. Due to the unique insulator and contact pin design, the connectors feature low return loss values for 4K and 8K signals.

Features & Benefits

Optimized contact pin and insulator design for UHD-data transmissions

Proven rearTWIST technology
Swiss antraloy plating
Fully compatible with conventional BNC chassis connectors
Improved return loss values at high frequencies

Optimized Return Loss
Due to optimized insulator design and reduced crimp diameter from center pin the Neutrik rearTWIST UHD BNC connector achieves increased headroom compared to conventional BNC connectors and offers additional return loss reserve for potential impedance deviations resulting from cable bending, incorrect connector assembly or faulty connection interfaces without signal interruption.

Crimp Dimensions
In order to achieve optimum return loss values at high frequencies the crimp dimension of the contact pin has been reduced.

Pin: 1.07 mm
Shield: 4.53 mm
Crimp die: DIE-R-BNCX-PDG

Approved Cables

To guarantee high performance for each cable-connector combination at high frequencies Neutrik measured common COAX cables which are specifically designed for ultra high definition transmission (UHD). Find all approved cables listed below.
Suitable cables:Belden 1855A, CommScope 7538
UHD optimized cables:Clark Wire CD7523, Gepco VDM230

Specifications

Connection Type BNC 75 Ω

Gender male

Electrical

Contact resistance ≤ 3 mΩ (inner)

Contact resistance ≤ 2 mΩ (outer)

Dielectric strength 1.5 kVdc

Impedance 75 Ω

Insulation resistance > 5 GΩ

Rated voltage < 50 V

VSWR

≤1.06 / >30 dB up to 6 GHz
≤1.13 / >24 dB up to 12 GHz
≤1.22 / >20 dB up to 18 GHz

Mechanical

Cable O.D. 4.3 mm

Cable retention > 30 N (center)

Crimp size 4.53 Hex crimp (shield)

Crimp size (pin) 1.07 crimp

Insertion force < 25 N

Lifetime > 1000 mating cycles

Locking device Bayonett

Cable anchoring Jacket crimping

Material

Contacts Brass (CuZn35Pb2), 0.2 µm AuCo (center contact)

Shell Brass (CuZn39Pb3)

Shell plating Antraloy

Insert PP

Environmental

Temperature range – 30 °C to +85 °C

Contact crimpability Complies with IEC 60803 and IEC 60352-2